Showing posts with label radio. Show all posts
Showing posts with label radio. Show all posts
Tuesday, September 9, 2014
Simple Radio Wave Alarm
This simple schema is sure to have the police beating a path to your door- however, it has the added advantage of alerting you to their presence even before their footsteps fall on the doormat.
Simple Radio Wave Alarm Circuit Diagram :
![]()
Notes :
Read More..
Simple Radio Wave Alarm Circuit Diagram :
Notes :
- The schema transmits on Medium Wave (this is the small problem with the police). IC1a, together with a sensor (try a 20cm x 20cm sheet of tin foil) oscillates at just over 1MHz. This is modulated by an audio frequency (a continuous beep) produced by IC1b. When a hand or a foot approaches the sensor, the frequency of the transmitter (IC1a) drops appreciably.
- Suppose now that the schema transmits at 1MHz. Suppose also that your radio is tuned to a frequency just below this. The 1MHz transmission will therefore not be heard by the radio. But bring a hand or a foot near to the sensor, and the transmitters frequency will drop, and a beep will be heard from the radio.
- Attach the antenna to a multiplug adapter that is plugged into the mains, and you will find that the Medium Wave transmission radiates from every wire in your house. Now place a suitably tuned Medium Wave radio near some wires or a plug point in your house, and an early-warning system is set up.
- Instead of using the sheet of tin foil as the sensor, you could use a doorknob, or burglar bars. Or you could use a pushbutton and series resistor (wired in series with the 33K resistor - the pushbutton would short it out) to decrease the frequency of IC1a, so activating the system by means of a pushbutton switch. In this case, the radio would be tuned to a frequency just below that of the transmitter.
Tuesday, September 2, 2014
2001 Volkswagen Passat Radio wiring diagram
schematic wiring diagram the 2001 Volkswagen Passat Radio. The radio system consists of: antenna amplifier, right rear woofer and rear tweeter, right front woofer and tweeter, left front woofer and tweeter, left rear tweeter and woofer, CD changer unit, and lines. The woofers low audio frequencies the tweeters high audio frequencies (typically from around ,000 Hz ,000 Hz)
Sunday, August 31, 2014
2x30W DUAL QUAD POWER AMPLIFIER FOR CAR RADIO TDA7377
Features:
- HIGH OUTPUT POWER CAPABILITY:
- 2 x 35W max./4Ω
- 2 x30W/4Ω EIAJ
- 2 x30W/4Ω EIAJ
- 2 x 20W/4Ω @14.4V, 1KHz, 10%
- 4 x 6W/4Ω @14.4V,1KHz, 10%
- 4 x 10W/2Ω @14.4V, 1KHz, 10%
- MINIMUM EXTERNAL COMPONENTS
- COUNT:
- – NO BOOTSTRAP CAPACITORS
- – NO BOUCHEROT CELLS
- – INTERNALLY FIXED GAIN (26dB BTL)
- ST-BY FUNCTION (CMOS COMPATIBLE)
- NOAUDIBLEPOPDURINGST-BYOPERATIONS
- DIAGNOSTICS FACILITY FOR:
- – CLIPPING
- – OUT TO GND SHORT
- – OUT TO VS SHORT
- – SOFT SHORT AT TURN-ON
- – THERMAL SHUTDOWN PROXIMITY
- Protections:
- OUPUT AC/DC SHORT CIRCUIT
- – TO GND
- – TO VS
- – ACROSS THE LOAD
- SOFT SHORT AT TURN-ON
- OVERRATING CHIP TEMPERATURE WITH
- SOFT THERMAL LIMITER
- LOAD DUMP VOLTAGE SURGE
- VERY INDUCTIVE LOADS
- FORTUITOUS OPEN GND
- REVERSED BATTERY
- ESD
Circuit Diagram:
![]() |
| 2x30W DUAL AMPLIFIER aplication circuit |
![]() |
| 2x30W QUAD AMPLIFIER aplication circuit |
Monday, August 25, 2014
4 x 30W QUAD BRIDGE CAR RADIO AMPLIFIER
Description
The TDA7383 is a new technology class AB Audio Power Amplifier in Flexiwatt 25 package designed for high end car radio applications.
Circuit Diagram
![]() |
| 4 x 30W QUAD BRIDGE CAR RADIO AMPLIFIER |
Subscribe to:
Posts (Atom)


